HPC.1015 Digital Three-Phase Heater Controllers are designed for proportional control of three-phase resistive heaters. HPC.1015 Series Digital Three-Phase Heater Controllers are used in many heater control applications such as building automation, air handling unit, duct type heater, where high-power resistive loads are proportionally controlled from a different automation point via the Rs-485 line with Modbus-Rtu protocol. Maximum load capacity is 15A.
-Central System Control (Modbus-Rtu)
-Trip-phase electrical resistance driving
- Proportional heater riding applications
-Duct Type Heater Applications
-Air Unit Heater Applications
-Dry Contact Entry Device Stop
| Environmental Features | |
| Operation, Storage Temperature | 0 ... +50°C / -25 ... +70°C (Without icing and condensation) |
| Protect Class | IP 56 |
| Packet | |
| Mounting Method | Wall Mounted |
| Dimension | L112xW100xH72 |
| Weight | 538 gr |
| Electrical Spesification | |
| Control | 0-10V Analog Signal |
| Relay Current Capacity | Max 15A |
| Heat Range | 0 ... +40°C (No Condensation) |
| Supply | AC230V ±10% , 50/60 Hz |
| Outputs | Pwm Time Based(On/Off) |
| Power Consumption | Max 6VA |
| Connection | Terminal Block 1,5mm² |
