M1002.X Heat recovery unit controller is designed to control single-stage permanent capacitor AC fan or EC Fan heat recovery units. With its advanced control scenarios and ready-made embedded software, it allows you to solve all desired heat recovery applications with a single device.
M1002.X Heat recovery unit control devices are used in heat recovery units that provide fresh air in offices, shopping malls, stores, business centers and restaurants.
-Temperature measurement via the room panel, return temperature measurement, outdoor temperature measurement, blowing temperature measurement.
- Direct operation without room panel over building automation.
-Manual or automatic Control
-Fan Speed Control (up to 6 steps)
-Fresh Air Damper, Bypass Damper Control
-After Heater Control
-Preheater Control
-Open/Close Valve Control
-Proportional Valve Control
-Heat Pump Control
-DX Control
-16 Internal HVAC Applications
-CO2 and air quality control (with CO2 transmitter)
-Connection to building automation with Modbus-RTU Communication.
-Weekly Program Feature (7 days can be set separately.)
| Operation, Storage Temperature | 0 ... +40°C/0 ... +50°C (without icing and condensation) |
| Protect Class | According to EN 60529 standard Control Card: IP 00 / Room Panel: IP 20 |
| Dimension | Room Panel: G86*Y86*D17 Control Card: G155*Y123*D35 |
| Control | Control with Panel |
| Relay Current Capacity | Vantilator & Aspirator: Max.10A / Heater & Device Working Relay Output: Max.3A |
| Supply | 220VAC ± 10% |
| Outputs | Vantilator, Aspirator, Heater, Device is running information output |
| Power Consumption | 5 VA |
| Connection | 1.5mm² terminal |
