HPC.1025 Digital Single-phase heater controllers are designed for proportional control of single-phase resistance type heaters. HPC.1025 Series Single Phase Heater Controllers are used in applications where high power resistive loads such as duct type heaters, room heaters and outdoor heaters are required to be proportionally controlled with an external 0-10V analog signal source. HPC.1025 Series Single-phase controllers provide Single-phase voltage output with Pulse Width Modulation (PWM) technique. The on and off time of the output varies according to the ratio of the 0-10V signal level to the 10V signal level at the input. The maximum load capacity is 25A.
-Proportional heater applications
-Duct Type Heater Applications
-Air Conditioning Applications
-Time Based (On/Off) Heater Applications
-Dry Contact Input Device Stop
| Operation, Storage Temperature | 0... +40°C/-25... +70°C (No Condensation) |
| Protect Class | EN 60529, IP56 |
| Mounting Method | Wall mount |
| Dimension | L112xW100xH72 |
| Weight | 538 gr |
| Control | 0-10V Analog Signal |
| Relay Current Capacity | Max 25A |
| Heat Range | 0 ... +40°C (No Condensation) |
| Supply | AC230V ±10% , 50/60 Hz |
| Outputs | Pwm Time Based(On/Off) |
| Power Consumption | Max 6VA |
| Connection | Terminal Connektor 1,5 mm2 |
