A heat pump is a system that uses electrical energy to transport a heat-loaded substance from one place to another. Heat Pumps are used for heating or cooling of villas, hotels and workplaces. The WHPC-1-M controller is designed for water sources heat pump control. It provides the ability to control and monitor with building management systems.
-Connection to building management systems (Modbus-RTU)
-Fault Entries
-Weekly program
-Keylock
| Operation Temperature | 1 |
| Storage Temperature | 0 ... +40°C/0 ... +50°C (Without Condensation) |
| Protect Class | EN 60529, IP00 |
| Mounting Method | Wall mounted |
| Dimension | Room Panel: B86*E86*H17mm / Control Card: B141*E100*H35 |
| Control | Modbus-RTU |
| Relay Current Capacity | 6x16 A , 5x5A |
| Heat Range | 0 ... +40°C/0 ... +50°C |
| Supply | 220 VAC , 50Hz |
| Outputs | 6 steps (Dry contact output) (Maximum 10A), 4 stages (Dry contact output) (Maximum 3A) / 4 pieces (0-10V) |
| Power Consumption | 7 VA |
| Connection | Terminal Block 1.5 mm2 |
