HPC.1015 Digital Single-phase heater controllers are designed for proportional control of single-phase resistance type heaters. HPC.1015 Series Single Phase Heater Controllers are used in applications where high power resistive loads such as duct type heaters, room heaters and outdoor heaters are required to be proportionally controlled with an external 0-10V analog signal source. HPC.1015 Series Single-phase controllers provide Single-phase voltage output with Pulse Width Modulation (PWM) technique. The on and off time of the output varies according to the ratio of the 0-10V signal level to the 10V signal level at the input. The maximum load capacity is 15A.
-Proportional heater applications
-Duct Type Heater Applications
-Air Conditioning Applications
-Time Based (On/Off) Heater Applications
-Dry Contact Input Device Stop
| Environmental Features | |
| Operation, Storage Temperature | 0... +40°C/-25... +70°C (No Condensation) |
| Protect Class | IP 56 |
| Packet | |
| Mounting Method | Wall Mounted |
| Dimension | L112xW100xH72 |
| Weight | 538 gr |
| Electrical Spesification | |
| Control | 0-10V Analog Signal |
| Relay Current Capacity | Max 15A |
| Heat Range | 0 ... +40°C (No Condensation) |
| Supply | AC230V ±10% , 50/60 Hz |
| Outputs | Pwm Time Based(On/Off) |
| Power Consumption | Max 6VA |
| Connection | Terminal Block 1,5mm² |
